ChanServ Advanced Guide

HELP
 ChanServ allows you to register and control various
 aspects of channels.  ChanServ can often prevent
 malicious users from "taking over" channels by limiting
 who is allowed channel operator privileges.  Available
 commands are listed below; to use them, type
 /msg ChanServ command.  For more information on a
 specific command, type /msg ChanServ HELP command.

  
 
EXPIRES
 
 Note that any channel which is not used for <num> days
 (i.e. which no user on the channel's access list enters
 for that period of time) will be automatically dropped.

REGISTER
 Syntax: /msg ChanServ  REGISTER channel password description

 
 Registers a channel in the ChanServ database.  In order
 to use this command, you must first be a channel operator
 on the channel you're trying to register.  The password
 is used with the IDENTIFY command to allow others to
 make changes to the channel settings at a later time.
 The last parameter, which must be included, is a
 general description of the channel's purpose.
 
 When you register a channel, you are recorded as the
 "founder" of the channel.  The channel founder is allowed

 to change all of the channel settings for the channel;
 ChanServ will also automatically give the founder
 channel-operator privileges when s/he enters the channel.
 See the ACCESS command (/msg ChanServ HELP ACCESS) for
 information on giving a subset of these privileges to
 other channel users.
 
 NOTICE: In order to register a channel, you must have
 first registered your nickname.  If you haven't,
 /msg ChanServ HELP for information on how to do so.


IDENTIFY
 Syntax: /msg ChanServ  IDENTIFY channel password
 
 Authenticates you to ChanServ as the founder of the given
 channel.  Many commands require you to use this command
 before using them.  The password should be the same one
 you sent with the REGISTER command.

 
LOGOUT
 Syntax: /msg ChanServ  LOGOUT channel nickname
 
 This command will log the selected nickname out meaning they 
 would have to reidentify themselves to regain their access.
 
 If you are the founder of the channel, you can log out anybody,
 else you can only log out yourself.


DROP
 Syntax: /msg ChanServ  DROP channel
 
 Unregisters the named channel.  Can only be used by
 channel founder, who must use the IDENTIFY command first.

SET
 Syntax: /msg ChanServ  SET channel option parameters

 
 Allows the channel founder to set various channel options
 and other information.
 
 Available options:
 
     FOUNDER       Set the founder of a channel
     SUCCESSOR     Set the successor for a channel
     PASSWORD      Set the founder password
     DESC          Set the channel description
     URL           Associate a URL with the channel
     EMAIL         Associate an E-mail address with the channel

     ENTRYMSG      Set a message to be sent to users when they
                      enter the channel
     BANTYPE       Set how Services make bans on the channel
     MLOCK         Lock channel modes on or off
     KEEPTOPIC     Retain topic when channel is not in use
     OPNOTICE      Send a notice when OP/DEOP commands are used
     PEACE         Regulate the use of critical commands
     PRIVATE       Hide channel from LIST command
     RESTRICTED    Restrict access to the channel

     SECURE        Activate ChanServ security features
     SECUREOPS     Stricter control of chanop status
     SECUREFOUNDER Stricter control of channel founder status
     SIGNKICK      Sign kicks that are done with KICK command
     TOPICLOCK     Topic can only be changed with TOPIC
     XOP           Toggle the user privilege system
 
 Type /msg ChanServ HELP SET option for more information on a

 particular option.

SET FOUNDER
 Syntax: /msg ChanServ  SET channel FOUNDER nick
 
 Changes the founder of a channel.  The new nickname must
 be a registered one.

SET SUCCESSOR
 Syntax: /msg ChanServ  SET channel SUCCESSOR nick

 
 Changes the successor of a channel.  If the founder's
 nickname expires or is dropped while the channel is still
 registered, the successor will become the new founder of the
 channel.  However, if the successor already has too many
 channels registered (<num>), the channel will be dropped
 instead, just as if no successor had been set.  The new
 nickname must be a registered one.

SET PASSWORD
 Syntax: /msg ChanServ  SET channel PASSWORD password

 
 Sets the password used to identify as the founder of the
 channel.

SET DESC
 Syntax: /msg ChanServ  SET channel DESC description
 
 Sets the description for the channel, which shows up with
 the LIST and INFO commands.


SET URL
 Syntax: /msg ChanServ  SET channel URL [url]
 
 Associates the given URL with the channel.  This URL will
 be displayed whenever someone requests information on the
 channel with the INFO command.  If no parameter is given,

 deletes any current URL for the channel.

SET EMAIL
 Syntax: /msg ChanServ  SET channel EMAIL [address]
 
 Associates the given E-mail address with the channel.
 This address will be displayed whenever someone requests
 information on the channel with the INFO command.  If no

 parameter is given, deletes any current E-mail address for
 the channel.

SET ENTRYMSG
 Syntax: /msg ChanServ  SET channel ENTRYMSG [message]
 
 Sets the message which will be sent via /notice to users
 when they enter the channel.  If no parameter is given,

 causes no message to be sent upon entering the channel.

SET BANTYPE
 Syntax: /msg ChanServ  SET channel BANTYPE bantype
 
 Sets the ban type that will be used by services whenever
 they need to ban someone from your channel.
 
 bantype is a number between 0 and 3 that means:

 
 0: ban in the form *!user@host
 1: ban in the form *!*user@host
 2: ban in the form *!*@host
 3: ban in the form *!*user@*.domain

SET KEEPTOPIC
 Syntax: /msg ChanServ  SET channel KEEPTOPIC {ON | OFF}
 
 Enables or disables the topic retention option for a

 channel.  When topic retention is set, the topic for the
 channel will be remembered by ChanServ even after the
 last user leaves the channel, and will be restored the
 next time the channel is created.

SET TOPICLOCK
 Syntax: /msg ChanServ  SET channel TOPICLOCK {ON | OFF}

 
 Enables or disables the topic lock option for a channel.
 When topic lock is set, ChanServ will not allow the
 channel topic to be changed except via the TOPIC
 command.

SET MLOCK
 Syntax: /msg ChanServ  SET channel MLOCK modes

 
 Sets the mode-lock parameter for the channel. ChanServ
 allows you to define certain channel modes to be always
 on, off or free to be either on or off.
 
 The modes parameter is constructed exactly the same way 
 as a /MODE command; that is, modes followed by a + are 
 locked on, and modes followed by a - are locked off. Note,
 however, that unlike the /MODE command, each use of

 SET MLOCK will remove all modes previously locked before
 setting the new!
 
 Warning:  If you set a mode-locked key, as in the second
 example below, you should also set the RESTRICTED option for
 the channel (see HELP SET RESTRICTED), or anyone entering
 the channel when it is empty will be able to see the key!
 

 Examples:
 
     SET #channel MLOCK +nt-iklps
         Forces modes n and t on, and modes i, k, l, p, and
         s off.  Mode m is left free to be either on or off.
 
     SET #channel MLOCK +knst-ilmp my-key
         Forces modes k, n, s, and t on, and modes i, l, m,
         and p off.  Also forces the channel key to be

         "my-key".
 
     SET #channel MLOCK +
         Removes the mode lock; all channel modes are free
         to be either on or off.

SET PEACE
 Syntax: /msg ChanServ  SET channel PEACE {ON | OFF}

 
 Enables or disables the peace option for a channel.
 When peace is set, an user won't be able to kick,
 ban or remove a channel status of an user that has
 a level superior or equal to his via ChanServ commands.

SET PRIVATE
 Syntax: /msg ChanServ  SET channel PRIVATE {ON | OFF}

 
 Enables or disables the private option for a channel.
 When private is set, a /msg ChanServ LIST will not
 include the channel in any lists.

SET RESTRICTED
 Syntax: /msg ChanServ  SET channel RESTRICTED {ON | OFF}

 
 Enables or disables the restricted access option for a
 channel.  When restricted access is set, users not on
 the access list will instead be kicked and banned from the channel.

SET SECURE
 Syntax: /msg ChanServ  SET channel SECURE {ON | OFF}

 
 Enables or disables ChanServ's security features for a
 channel.  When SECURE is set, only users who have
 registered their nicknames with ChanServ and IDENTIFY'd
 with their password will be given access to the channel
 as controlled by the access list.

SET SECUREOPS
 Syntax: /msg ChanServ  SET channel SECUREOPS {ON | OFF}

 
 Enables or disables the secure ops option for a channel.
 When secure ops is set, users who are not on the userlist
 will not be allowed chanop status.
 
SET SECUREFOUNDER
 Syntax: /msg ChanServ  SET channel SECUREFOUNDER {ON | OFF}

 
 Enables or disables the secure founder option for a channel.
 When secure founder is set, only the real founder will be
 able to drop the channel, change its password, its founder and its
 successor, and not those who are IDENTIFY'd with ChanServ.
 
SET SIGNKICK
 Syntax: /msg ChanServ  SET channel SIGNKICK {ON | LEVEL | OFF}

 
 Enables or disables signed kicks for a
 channel.  When SIGNKICK is set, kicks issued with
 ChanServ KICK command will have the nick that used the
 command in their reason.
 
 If you use LEVEL, those who have a level that is superior 
 or equal to the SIGNKICK level on the channel won't have their 
 kicks signed. See /msg ChanServ HELP LEVELS for more information. 


SET XOP
 Syntax: /msg ChanServ  SET channel XOP {ON | OFF}
 
 Enables or disables the xOP lists system for a channel.
 When XOP is set, you have to use the AOP/SOP/VOP

 commands in order to give channel privileges to
 users, else you have to use the ACCESS command.
 
 Technical Note: when you switch from access list to xOP 
 lists system, your level definitions and user levels will be
 changed, so you won't find the same values if you
 switch back to access system! 
 
 You should also check that your users are in the good xOP 
 list after the switch from access to xOP lists, because the 
 guess is not always perfect... in fact, it is not recommended 
 to use the xOP lists if you changed level definitions with 
 the LEVELS command.

 
 Switching from xOP lists system to access list system
 causes no problem though.

SET OPNOTICE
 Syntax: /msg ChanServ  SET channel OPNOTICE {ON | OFF}
 
 Enables or disables the op-notice option for a channel.

 When op-notice is set, ChanServ will send a notice to the
 channel whenever the OP or DEOP commands are used for a user
 in the channel.

AOP
 Syntax: /msg ChanServ  AOP channel ADD nick

         AOP channel DEL {nick | entry-num | list}
         AOP channel LIST [mask | list]

         AOP channel CLEAR
 
 Maintains the AOP (AutoOP) list for a channel. The AOP 
 list gives users the right to be auto-opped on your channel,
 to unban or invite themselves if needed, to have their
 greet message showed on join, and so on.

 
 The AOP ADD command adds the given nickname to the
 AOP list.
 
 The AOP DEL command removes the given nick from the
 AOP list.  If a list of entry numbers is given, those
 entries are deleted.  (See the example for LIST below.)
 
 The AOP LIST command displays the AOP list.  If

 a wildcard mask is given, only those entries matching the
 mask are displayed.  If a list of entry numbers is given,
 only those entries are shown; for example:

    AOP #channel LIST 2-5,7-9
       Lists AOP entries numbered 2 through 5 and
       7 through 9.
       
 The AOP CLEAR command clears all entries of the
 AOP list.
 

 The AOP ADD and AOP DEL commands are limited to
 SOPs or above, while the AOP CLEAR command can only
 be used by the channel founder. However, any user on the
 AOP list may use the AOP LIST command.
 

 This command may have been disabled for your channel, and
 in that case you need to use the access list. See 
 /msg ChanServ HELP ACCESS for information about the access list,
 and /msg ChanServ HELP SET XOP to know how to toggle between 
 the access list and xOP list systems.

HOP
 Syntax: /msg ChanServ  HOP channel ADD nick

         HOP channel DEL {nick | entry-num | list}
         HOP channel LIST [mask | list]

         HOP channel CLEAR
 
 Maintains the HOP (HalfOP) list for a channel. The HOP 
 list gives users the right to be auto-halfopped on your 
 channel.
 

 The HOP ADD command adds the given nickname to the
 HOP list.
 
 The HOP DEL command removes the given nick from the
 HOP list.  If a list of entry numbers is given, those
 entries are deleted.  (See the example for LIST below.)
 
 The HOP LIST command displays the HOP list.  If

 a wildcard mask is given, only those entries matching the
 mask are displayed.  If a list of entry numbers is given,
 only those entries are shown; for example:

    HOP #channel LIST 2-5,7-9
       Lists HOP entries numbered 2 through 5 and
       7 through 9.
       
 The HOP CLEAR command clears all entries of the
 HOP list.
 

 The HOP ADD, HOP DEL and HOP LIST commands are 
 limited to AOPs or above, while the HOP CLEAR command 
 can only be used by the channel founder.
 
 This command may have been disabled for your channel, and
 in that case you need to use the access list. See 

 /msg ChanServ HELP ACCESS for information about the access list,
 and /msg ChanServ HELP SET XOP to know how to toggle between 
 the access list and xOP list systems.

SOP
 Syntax: /msg ChanServ  SOP channel ADD nick

         SOP channel DEL {nick | entry-num | list}
         SOP channel LIST [mask | list]

         SOP channel CLEAR
 
 Maintains the SOP (SuperOP) list for a channel. The SOP 
 list gives users all rights given by the AOP list, and adds
 those needed to use the AutoKick and the BadWords lists, 
 to send and read channel memos, and so on.

 
 The SOP ADD command adds the given nickname to the
 SOP list.
 
 The SOP DEL command removes the given nick from the
 SOP list.  If a list of entry numbers is given, those
 entries are deleted.  (See the example for LIST below.)
 
 The SOP LIST command displays the SOP list.  If

 a wildcard mask is given, only those entries matching the
 mask are displayed.  If a list of entry numbers is given,
 only those entries are shown; for example:

    SOP #channel LIST 2-5,7-9
       Lists AOP entries numbered 2 through 5 and
       7 through 9.
       
 The SOP CLEAR command clears all entries of the
 SOP list.
 

 The SOP ADD, SOP DEL and SOP CLEAR commands are 
 limited to the channel founder. However, any user on the
 AOP list may use the SOP LIST command.
 
 This command may have been disabled for your channel, and
 in that case you need to use the access list. See 

 /msg ChanServ HELP ACCESS for information about the access list,
 and /msg ChanServ HELP SET XOP to know how to toggle between 
 the access list and xOP list systems.

VOP
 Syntax: /msg ChanServ  VOP channel ADD nick

         VOP channel DEL {nick | entry-num | list}
         VOP channel LIST [mask | list]

         VOP channel CLEAR
 
 Maintains the VOP (VOicePeople) list for a channel.  
 The VOP list allows users to be auto-voiced and to voice 
 themselves if they aren't.
 

 The VOP ADD command adds the given nickname to the
 VOP list.
 
 The VOP DEL command removes the given nick from the
 VOP list.  If a list of entry numbers is given, those
 entries are deleted.  (See the example for LIST below.)
 
 The VOP LIST command displays the VOP list.  If

 a wildcard mask is given, only those entries matching the
 mask are displayed.  If a list of entry numbers is given,
 only those entries are shown; for example:

    VOP #channel LIST 2-5,7-9
       Lists VOP entries numbered 2 through 5 and
       7 through 9.
       
 The VOP CLEAR command clears all entries of the
 VOP list.
 

 The VOP ADD, VOP DEL and VOP LIST commands are 
 limited to AOPs or above, while the VOP CLEAR command 
 can only be used by the channel founder.
 
 This command may have been disabled for your channel, and
 in that case you need to use the access list. See 

 /msg ChanServ HELP ACCESS for information about the access list,
 and /msg ChanServ HELP SET XOP to know how to toggle between 
 the access list and xOP list systems.

ACCESS
 Syntax: /msg ChanServ  ACCESS channel ADD nick level

         ACCESS channel DEL {nick | entry-num | list}
         ACCESS channel LIST [mask | list]

         ACCESS channel CLEAR
 
 Maintains the access list for a channel.  The access
 list specifies which users are allowed chanop status or
 access to ChanServ commands on the channel.  Different
 user levels allow for access to different subsets of
 privileges; /msg ChanServ HELP ACCESS LEVELS for more

 specific information.  Any nick not on the access list has
 a user level of 0.
 
 The ACCESS ADD command adds the given nickname to the
 access list with the given user level; if the nick is
 already present on the list, its access level is changed to
 the level specified in the command.  The level specified
 must be less than that of the user giving the command, and
 if the nick is already on the access list, the current

 access level of that nick must be less than the access level
 of the user giving the command.
 
 The ACCESS DEL command removes the given nick from the
 access list.  If a list of entry numbers is given, those
 entries are deleted.  (See the example for LIST below.)
 
 The ACCESS LIST command displays the access list.  If
 a wildcard mask is given, only those entries matching the
 mask are displayed.  If a list of entry numbers is given,
 only those entries are shown; for example:


    ACCESS #channel LIST 2-5,7-9
       Lists access entries numbered 2 through 5 and
       7 through 9.
       
 The ACCESS CLEAR command clears all entries of the
 access list.

ACCESS LEVELS
 User access levels

 
 By default, the following access levels are defined:
 
    Founder   Full access to ChanServ functions; automatic
                      opping upon entering channel.  Note
                      that only one person may have founder
                      status (it cannot be given using the
                      ACCESS command).

         10   Access to AKICK command; automatic opping.
          5   Automatic opping.
          3   Automatic voicing.
          0   No special privileges; can be opped by other

                      ops (unless secure-ops is set).
         <0   May not be opped.
 
 These levels may be changed, or new ones added, using the
 LEVELS command; type /msg ChanServ HELP LEVELS for

 information.

AKICK
 Syntax: /msg ChanServ  AKICK channel ADD {nick | mask} [reason]

         AKICK channel STICK mask
         AKICK channel UNSTICK mask
         AKICK channel DEL {nick | mask | entry-num | list}

         AKICK channel LIST [mask | entry-num | list]
         AKICK channel VIEW [mask | entry-num | list]

         AKICK channel ENFORCE
         AKICK channel CLEAR
 
 Maintains the AutoKick list for a channel.  If a user

 on the AutoKick list attempts to join the channel,
 ChanServ will ban that user from the channel, then kick
 the user.
 
 The AKICK ADD command adds the given nick or usermask
 to the AutoKick list.  If a reason is given with
 the command, that reason will be used when the user is
 kicked; if not, the default reason is "You have been
 banned from the channel".
 When akicking a registered nick the nickserv account

 will be added to the akick list instead of the mask.
 All users within that nickgroup will then be akicked.
 
 The AKICK STICK command permanently bans the given mask 
 on the channel. If someone tries to remove the ban, ChanServ
 will automatically set it again. You can't use it for
 registered nicks.
 
 The AKICK UNSTICK command cancels the effect of the
 AKICK STICK command, so you'll be able to unset the

 ban again on the channel.
 
 The AKICK DEL command removes the given nick or mask
 from the AutoKick list.  It does not, however, remove any
 bans placed by an AutoKick; those must be removed
 manually.
 
 The AKICK LIST command displays the AutoKick list, or
 optionally only those AutoKick entries which match the
 given mask.
 

 The AKICK VIEW command is a more verbose version of
 AKICK LIST command.
 
 The AKICK ENFORCE command causes ChanServ to enforce the
 current AKICK list by removing those users who match an
 AKICK mask.
 
 The AKICK CLEAR command clears all entries of the

 akick list.

LEVELS
 Syntax: /msg ChanServ  LEVELS channel SET type level
         LEVELS channel {DIS | DISABLE} type

         LEVELS channel LIST
         LEVELS channel RESET
 
 The LEVELS command allows fine control over the meaning of

 the numeric access levels used for channels.  With this
 command, you can define the access level required for most
 of ChanServ's functions.  (The SET FOUNDER and SET PASSWORD
 commands, as well as this command, are always restricted to
 the channel founder.)
 
 LEVELS SET allows the access level for a function or group of
 functions to be changed.  LEVELS DISABLE (or DIS for short)

 disables an automatic feature or disallows access to a
 function by anyone other than the channel founder.
 LEVELS LIST shows the current levels for each function or
 group of functions.  LEVELS RESET resets the levels to the
 default levels of a newly-created channel (see
 HELP ACCESS LEVELS).
 
 For a list of the features and functions whose levels can be
 set, see HELP LEVELS DESC.


INFO
 Syntax: /msg ChanServ  INFO channel [ALL]
 
 Lists information about the named registered channel,
 including its founder, time of registration, last time
 used, description, and mode lock, if any. If ALL is 

 specified, the entry message and successor will also 
 be displayed.
 
 By default, the ALL option is limited to those with
 founder access on the channel.

LIST
 Syntax: /msg ChanServ  LIST pattern
 

 Lists all registered channels matching the given pattern.
 (Channels with the PRIVATE option set are not listed.)
 Note that a preceding '#' specifies a range, channel names
 are to be written without '#'.

OP
 Syntax: /msg ChanServ  OP [#channel [nick]]

 
 Ops a selected nick on a channel. If nick is not given,
 it will op you. If channel and nick are not given,
 it will op you on all channels you're on, provided you
 have the rights to.
 
 By default, limited to AOPs or those with level 5 access 
 and above on the channel.

DEOP
 Syntax: /msg ChanServ  DEOP [#channel [nick]]

 
 Deops a selected nick on a channel. If nick is not given,
 it will deop you. If channel and nick are not given,
 it will deop you on all channels you're on, provided you
 have the rights to.
 
 By default, limited to AOPs or those with level 5 access 
 and above on the channel.
 
VOICE
 Syntax: /msg ChanServ  VOICE [#channel [nick]]

 
 Voices a selected nick on a channel. If nick is not given,
 it will voice you. If channel and nick are not given,
 it will voice you on all channels you're on, provided you
 have the rights to.
 
 By default, limited to AOPs or those with level 5 access 
 and above on the channel, or to VOPs or those with level 3 
 and above for self voicing.

DEVOICE
 Syntax: /msg ChanServ  DEVOICE [#channel [nick]]

 
 Devoices a selected nick on a channel. If nick is not given,
 it will devoice you. If channel and nick are not given,
 it will devoice you on all channels you're on, provided you
 have the rights to.
 
 By default, limited to AOPs or those with level 5 access 
 and above on the channel, or to VOPs or those with level 3 
 and above for self devoicing.
 
HALFOP
 Syntax: /msg ChanServ  HALFOP [#channel [nick]]

 
 Halfops a selected nick on a channel. If nick is not given,
 it will halfop you. If channel and nick are not given,
 it will halfop you on all channels you're on, provided you
 have the rights to.
 
 By default, limited to AOPs and those with level 5 access 
 and above on the channel, or to HOPs or those with level 4 
 and above for self halfopping.

DEHALFOP
 Syntax: /msg ChanServ  DEHALFOP [#channel [nick]]

 
 Dehalfops a selected nick on a channel. If nick is not given,
 it will dehalfop you. If channel and nick are not given,
 it will dehalfop you on all channels you're on, provided you
 have the rights to.
 
 By default, limited to AOPs and those with level 5 access 
 and above on the channel, or to HOPs or those with level 4 
 and above for self dehalfopping.
 
PROTECT
 Syntax: /msg ChanServ  PROTECT [#channel [nick]]

 
 Protects a selected nick on a channel. If nick is not given,
 it will protect you. If channel and nick are not given,
 it will protect you on all channels you're on, provided you
 have the rights to.
 
 By default, limited to the founder, or to SOPs or those with 
 level 10 and above on the channel for self protecting.

DEPROTECT
 Syntax: /msg ChanServ  DEPROTECT [#channel [nick]]

 
 Deprotects a selected nick on a channel. If nick is not given,
 it will deprotect you. If channel and nick are not given,
 it will deprotect you on all channels you're on, provided you
 have the rights to.
 
 By default, limited to the founder, or to SOPs or those with 
 level 10 and above on the channel for self deprotecting.

OWNER
 Syntax: /msg ChanServ  OWNER [#channel]

 
 Gives you owner status on channel. If channel is not 
 given, it will give you owner status on all channels you're 
 on, provided you have the rights to.
 
 Limited to those with founder access on the channel.

DEOWNER
 Syntax: /msg ChanServ  DEOWNER [#channel]

 
 Removes your owner status on channel. If channel is 
 not given, it will remove your owner status on all channels 
 you're on, provided you have the rights to.
 
 Limited to those with founder access on the channel.

INVITE
 Syntax: /msg ChanServ  INVITE channel
 

 Tells ChanServ to invite you into the given channel.  
 
 By default, limited to AOPs or those with level 5 and above
 on the channel.

UNBAN
 Syntax: /msg ChanServ  UNBAN channel
 
 Tells ChanServ to remove all bans preventing you from
 entering the given channel.  
 
 By default, limited to AOPs or those with level 5 and above

 on the channel.
 
KICK
 Syntax: /msg ChanServ  KICK [#channel [nick [reason]]]

 
 Kicks a selected nick on a channel. If nick is not given,
 it will kick you. If channel and nick are not given,
 it will kick you on all channels you're on, provided you
 have the rights to.
 
 By default, limited to AOPs or those with level 5 access 
 and above on the channel.

BAN
 Syntax: /msg ChanServ  BAN [#channel [nick [reason]]]

 
 Bans a selected nick on a channel. If nick is not given,
 it will ban you. If channel and nick are not given,
 it will ban you on all channels you're on, provided you
 have the rights to.
 
 By default, limited to AOPs or those with level 5 access 
 and above on the channel.

TOPIC
 Syntax: /msg ChanServ  TOPIC channel [topic]

 
 Causes ChanServ to set the channel topic to the one
 specified. If topic is not given, then an empty topic
 is set. This command is most useful in conjunction
 with SET TOPICLOCK. See /msg ChanServ HELP SET TOPICLOCK
 for more information.
 
 By default, limited to those with founder access on the
 channel. 

CLEAR
 Syntax: /msg ChanServ  CLEAR channel what
 
 Tells ChanServ to clear certain settings on a channel.  what
 can be any of the following:
 
      MODES    Resets all modes on the channel (i.e. clears

                   modes i,k,l,m,n,p,s,t).
      BANS     Clears all bans on the channel.
      EXCEPTS  Clears all excepts on the channel.
      INVITES  Clears all invites on the channel.
      OPS      Removes channel-operator status (mode +o) from
                   all channel operators.
      HOPS     Removes channel-halfoperator status (mode +h) from
                   all channel halfoperators, if supported.
      VOICES   Removes "voice" status (mode +v) from anyone

                   with that mode set.
      USERS    Removes (kicks) all users from the channel.
 
 By default, limited to those with founder access on the
 channel.
 
  • GETKEY
     Syntax: /msg ChanServ  GETKEY channel
     
    
     Returns the key of the given channel. This is a command
     mainly intended to be used by bots and/or scripts, so
     the output is in the following way:
     
     KEY <channel> <key>
     
     key is "NO KEY" if no key is set.
     
    
    SENDPASS
     Syntax: /msg ChanServ  SENDPASS channel
    
     
     Send the password of the given channel to the e-mail address
     set in the founder's nickname record. This command is really 
     useful to deal with lost passwords.
     
     May be limited to IRC operators on certain networks.
     
     This command is unavailable when encryption is enabled.
    
    
    SERVADMIN HELP
      
     Services admins can also drop any channel without needing
     to identify via password, and may view the access, AKICK,
     and level setting lists for any channel.
    
     
    
  • SERVADMIN LOGOUT
     Syntax: /msg ChanServ  LOGOUT channel [nickname]
     
     This command will log the selected nickname out meaning they 
     would have to reidentify themselves to regain their access.
     
    
     If you are the founder of the channel, you can log out anybody,
     else you can only log out yourself.
     
     If you are a Services admin, you can log out 
     anybody of any channel without having to be the founder
     of the channel. Also, you can omit the nickname parameter;
     this will log out all identified users from the channel.
    
    
    SERVADMIN DROP
     Syntax: /msg ChanServ  DROP channel
    
     
     Unregisters the named channel.  Only Services admins
     can drop a channel for which they have not identified.
    
    
    SERVADMIN SET
     
     Services admins can also set the option NOEXPIRE, with
     which channels can be prevented from expiring.
     Additionally, Services admins can set options for any
     channel without identifying by password for the channel.
    
    
    SERVADMIN SET NOEXPIRE
     Syntax: /msg ChanServ  SET channel NOEXPIRE {ON | OFF}
    
     
     Sets whether the given channel will expire.  Setting this
     to ON prevents the channel from expiring.
    
    
    SERVADMIN INFO
     
     Services admins can use the ALL parameter with any channel.
    
    
    SERVADMIN LIST
     Syntax: /msg ChanServ  LIST pattern [FORBIDDEN] [SUSPENDED] [NOEXPIRE]
    
     
     Lists all registered channels matching the given pattern.
     Channels with the PRIVATE option set will only be displayed
     to Services admins. Channels with the NOEXPIRE option set 
     will have a ! appended to the channel name for Services admins.
     
     If the FORBIDDEN, SUSPENDED or NOEXPIRE options are given, only 
     channels which, respectively, are FORBIDden, SUSPENDed or have 
    
     the NOEXPIRE flag set will be displayed.  If multiple options are 
     given, more types of channels will be displayed. These options are 
     limited to Services admins.
    
    
    SERVADMIN GETPASS
     Syntax: /msg ChanServ  GETPASS channel
     
     Returns the password for the given channel.  Note that
    
     whenever this command is used, a message including the
     person who issued the command and the channel it was used
     on will be logged and sent out as a WALLOPS/GLOBOPS.
    
    
    SERVADMIN FORBID
     Syntax: /msg ChanServ  FORBID channel [reason]
     
     Disallows anyone from registering or using the given
    
     channel.  May be cancelled by dropping the channel.
     
     Reason may be required on certain networks.
    
    
    SERVADMIN SUSPEND
     Syntax: /msg ChanServ  SUSPEND channel [reason]
     
     Disallows anyone from registering or using the given
    
     channel.  May be cancelled by using the UNSUSPEND
     command to preserve all previous channel data/settings.
     
     Reason may be required on certain networks.
    
    
    SERVADMIN UNSUSPEND
     Syntax: /msg ChanServ  UNSUSPEND channel
     
     Releases a suspended channel. All data and settings
     are preserved from before the suspension.
    
    
    SERVADMIN STATUS
     Syntax: /msg ChanServ  STATUS channel nickname
    
     
     Returns the current access level of the given nick on the
     given channel.  The reply is of the form:
     
         STATUS channel nickname access-level
     
     If an error occurs, the reply will be in the form:
     
         STATUS ERROR error-message